Practice labsCCNA & CCNP practice labs — hands-on Cisco CML scenarios
Hands-on CCNA and CCNP practice labs — OSPF, VLANs, ACLs, routing, NAT and more, each a real Cisco Modeling Labs scenario you build and grade against the answer key.
Hands-on CCNA static routing and manual summarization lab using a compact HQ–Branch–Remote topology. You will replace three specific static routes to Branch networks with a single /22 summary at HQ, verify end-to-end host reachability, observe the routing table reduction, and prevent over-aggregation loops by adding a Null0 discard route at Branch. A recommended step has you add the same /22 summary at Remote (replacing its default) to practice summarization on both sides.
CCNA55 min6 objectives
View details
Hands-on IPv6 static and default routing across a 3-router, 2-LAN topology with end-user hosts. You will enable IPv6 unicast routing, apply IPv6 addressing, configure hub-and-spoke static and default routes, and validate bidirectional host reachability. The guide provides scenario context, step-by-step tasks with the why behind each action, and targeted troubleshooting.
CCNA55 min6 objectives
View details
Hands-on CCNA static routing troubleshooting in a realistic three-router core/edge topology with two user LANs. Static routing on the network was recently changed and users at SITE-A (10.10.10.10) and SITE-B (10.30.30.10) can no longer reach each other; you will investigate the routers' route tables and next-hop reachability to diagnose and restore full bidirectional connectivity.
CCNA55 min5 objectives
View details
Deploy a compact two-site topology with a WAN core and two end hosts to practice IPv4 static host routes (/32) versus subnet routes (/24). You will configure a specific /32 host route to steer one destination host over the direct R1–R3 path while a broader /24 for the same remote LAN is sent via the R1–R2–R3 core. Validate with show commands and traceroute, then troubleshoot longest-prefix match and return-path issues.
CCNA55 min4 objectives
View details
Implement VLANs, 802.1Q trunking, router-on-a-stick inter-VLAN routing, and access-layer port security on a compact branch network with two access switches and two endpoints. You will configure segmentation (VLANs 10, 20, 99), hardened trunks with a dedicated native VLAN 999, Layer 3 gateways on a core router, and sticky MAC port security on user-facing ports. Verify end-to-end reachability and remediate common misconfigurations like missing allowed VLANs, native VLAN mismatches, and unauthorized endpoint moves.
CCNA68 min6 objectives
View details
Build a 3-router triangle with two end-to-end paths between Branch A and the Data Center. Stand up OSPF area 0, create an ECMP condition, then intentionally steer traffic using ip ospf cost. Verify from the end hosts and troubleshoot common OSPF control-plane mismatches.
CCNA55 min5 objectives
View details
Deploy a compact enterprise multi-area OSPF with a backbone (area 0) and one branch area (area 10). You will configure area 10 as a stub, then transition it to a totally-stubby area from the ABR, validate reduced LSDB and routing tables, and simulate an operational fault (area mismatch) to diagnose adjacency loss and restore full transit. The lab uses three routers and two hosts to verify end-to-end reachability and real-world outcomes.
CCNA & CCNP75 min4 objectives
View details
Build a 5-node CML lab to design OSPFv2 across two areas with an ABR that summarizes non-backbone routes using area range. Validate adjacencies, end-to-end reachability, and that the backbone learns a single summary in place of specific inter-area routes. Intentionally introduce an area mismatch, diagnose why the adjacency does not form, and repair it.
CCNA & CCNP62 min5 objectives
View details
Deploy OSPFv2 with MD5 authentication on backbone links, deliberately trigger and diagnose an area mismatch adjacency failure, then fix it and restore end-to-end reachability between two branch hosts in a compact three-router topology.
CCNA & CCNP68 min5 objectives
View details
Build and troubleshoot a compact multi-area OSPF design with a single ABR between area 0 and area 10. You will deploy OSPF, observe an adjacency failure caused by an area mismatch on one transit link, repair it, and validate that routes propagate end to end between two user LANs.
CCNA & CCNP55 min4 objectives
View details
Hands-on CCNA Layer 2 switching lab: build VLANs, access ports, hardened 802.1Q trunks, and basic port-security across two access switches and an L2 core. Verify segmentation end-to-end from real hosts and practice troubleshooting native-VLAN and port/VLAN mismatches.
CCNA55 min5 objectives
View details
Deploy OSPFv2 across a 3-router, 2-LAN branch/core/edge topology. Mark LAN-facing interfaces as passive so they do not send OSPF hellos or form adjacencies. Originate a default route only from the edge router and verify default propagation end-to-end using real client traffic. Includes realistic troubleshooting around missing adjacencies, non-propagating defaults, and unreachable external destinations.
CCNA70 min5 objectives
View details
