Topic

VTY practice labs

2 hands-on VTY scenarios you build in your own Cisco Modeling Labs instance and grade against the answer key. VTY configuration and troubleshooting practice for CCNA and CCNP.

Included with a subscription

AdvancedLocked

Secure-Access Troubleshooting Capstone: SSH VTY Fix

Advanced secure-access capstone, run as a fault hunt. A hardening change was rolled back badly overnight: the edge router is reachable but the management plane is wide open in several different ways at once, and an SSH key cannot even be generated. You get symptoms and the required end state — no fault list. Everything is on one device, so the work is knowing which pieces of a management-plane build depend on each other rather than hunting across a topology.

CCNA40 min5 objectives

BeginnerLocked

SSH-Only Management: Disabling Telnet on R1

Harden a Cisco IOS router so remote management is allowed only via SSH. You will remove Telnet from the VTY lines, keep local authentication, and add an idle-session timeout. Verify success from a Linux ADMIN host by confirming SSH works and Telnet is refused.

CCNA25 min6 objectives

Looking for something else? Browse the full lab archive, narrow it to self-standing labs, or see today's daily lab.