3 hands-on Port-channel scenarios you build in your own Cisco Modeling Labs instance and grade against the answer key. Focused Port-channel configuration and troubleshooting practice for CCNA and CCNP.
Build a two-link LACP EtherChannel between SW1 and SW2 using an active/passive pairing. The logical Port-channel2 carries VLAN 20 as an access link so two hosts on opposite switches can communicate. Verify with show etherchannel summary, show lacp neighbor, and host-to-host pings.
Beginner CCNA lab that builds a static Layer-2 EtherChannel (mode on) between two ioll2-xe switches using two parallel links as members of Port-channel1. The Port-channel is configured as an access port in VLAN 10 so that two hosts, one on each switch, can communicate without spanning-tree blocking a parallel path. Learners deploy and verify the bundle, then validate end-to-end host connectivity.
Build a Layer-2 PAgP EtherChannel between two ioll2-xe switches (SW1 and SW2) using a desirable/auto pairing on two parallel links. Bundle Ethernet0/0 and Ethernet0/1 into Port-channel 3, make the port-channel a VLAN 30 access interface on both switches, and verify with show etherchannel summary, show pagp neighbor, show pagp counters, and end-to-end host pings in VLAN 30.
Looking for something else? Browse the full lab archive or see today's daily lab.