3 hands-on Layer2 scenarios you build in your own Cisco Modeling Labs instance and grade against the answer key. Focused Layer2 configuration and troubleshooting practice for CCNA and CCNP.
Build a two-link LACP EtherChannel between SW1 and SW2 using an active/passive pairing. The logical Port-channel2 carries VLAN 20 as an access link so two hosts on opposite switches can communicate. Verify with show etherchannel summary, show lacp neighbor, and host-to-host pings.
Beginner CCNA lab that builds a static Layer-2 EtherChannel (mode on) between two ioll2-xe switches using two parallel links as members of Port-channel1. The Port-channel is configured as an access port in VLAN 10 so that two hosts, one on each switch, can communicate without spanning-tree blocking a parallel path. Learners deploy and verify the bundle, then validate end-to-end host connectivity.
Beginner CCNA STP lab on a three-switch triangle with two hosts in VLAN 20. You will deliberately control the Spanning Tree root election using the root primary/secondary macros so SW1 is the active root and SW2 is the standby. The baseline already provides VLANs and trunks; your job is to set root priorities deterministically and verify the resulting roles and port states without introducing any Layer-3.
Looking for something else? Browse the full lab archive or see today's daily lab.